How to Find the Right Replacement Part

Short answer: Find the model number (and type number, if there is one) on your tool's label, look that model up in a parts diagram to get the exact part number, then search that part number and check the listing's compatible models and pack size.

Step 1: Get the model number, not the serial number

Every tool and piece of outdoor equipment has a label or nameplate with its model number. That number tells you which parts list applies. The serial number identifies only your individual unit, so it is rarely needed. See where to find the model number for the usual label locations.

Don't skip the type or version number

Some brands, including DeWalt, Black+Decker and Porter-Cable, print a Type number next to the model (for example "Type 2"). Different types of the same model can use different internal parts, so write down the model and the type.

Engines have their own model number

On mowers, pressure washers, generators and similar equipment, the engine usually carries a separate model number from the machine itself. Use the engine's number for engine parts (carburetors, filters, gaskets, spark plugs) and the equipment's number for deck, frame, wheel and handle parts.

Step 2: Find the part on the parts diagram

A parts diagram (exploded view) shows every part of your model with a reference number, and the parts list gives the manufacturer part number for each one. Search our parts diagrams by model number, click the part, and you will see the matching listing when we carry it.

Step 3: Search the part number

Search the manufacturer part number in the search box at the top of any page. Manufacturers sometimes supersede a part number, which means they replace it with a new number for the same part. If your old number doesn't turn up, search the model number instead or contact us and we will look up the current number.

Step 4: Check compatibility and pack size

  • Each listing shows the models the part fits. Make sure your model (and type) is on the list.
  • Check the quantity. Some parts, such as carbon brushes, filters and springs, are sold singly, and others come in 2-, 3-, 5- or 10-packs.
  • Compare the photo with your old part.

Common mistakes to avoid

  • Ordering by a similar-looking model number. One digit or letter can mean a different part.
  • Using the engine model for a deck part, or the other way round.
  • Ignoring the type number on power tools.
  • Assuming a part from a different brand fits because it looks the same.

Frequently asked questions

Where is the part number on my tool?

Most replacement parts are not stamped with a part number. Get the part number from the parts diagram or parts list for your model number, or from the owner's manual.

What if my part number is no longer available?

Manufacturers often supersede old part numbers with new ones for the same part. Search your model number or contact us and we will find the current part number.

Do I need the serial number?

Usually not. The model number (plus the type number on some power tools) is what determines the parts. A serial number is occasionally needed when a manufacturer changed parts partway through a production run.

Need help? Send us your model number (a photo of the label helps) through our contact form or call 440-510-8023, Monday-Friday, and we will confirm the right part before you order. Free shipping to the continental US, orders ship within 24 hours, 30-day returns.